| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Door/Hatch | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000033Q3006X |
| Title: DOOR / HATCH: POWER BACK DOOR CONTROL SWITCH (for Luggage Compartment): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL BACK DOOR CONTROL SWITCH
|
(a) Engage the 4 claws and install the back door control switch onto the No. 3 side trim base. |
|
(b) Engage the claw and install the No. 3 side trim base with back door control switch onto the rear window side garnish assembly LH. |
(c) Install the screw.
2. INSTALL REAR WINDOW NO. 2 SIDE GARNISH ASSEMBLY LH
3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH
4. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat)
5. INSTALL REAR FLOOR MAT SUPPORT PLATE
6. INSTALL ROPE HOOK ASSEMBLY
7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
8. INSTALL REAR DOOR SCUFF PLATE LH
9. INSTALL REAR FLOOR STEP NO. 1 COVER
10. INSTALL REAR FLOOR STEP NO. 2 COVER
11. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH
12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Manual Seat)
(a) Remove the rear No. 2 seat assembly LH
.
13. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the rear No. 2 seat assembly LH
.
14. INSTALL DECK BOARD BRACKET
15. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY
16. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY
17. INSTALL ROPE HOOK ASSEMBLY
18. INSTALL LUGGAGE COMPARTMENT TRIM BOX
19. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
|
|